Fibered Foundation Coating Français
Description
This excellent fiber foundation coating, CR-64 is an asbestos free product, formulated with special ingredients to waterproof concrete and masonry foundations. The product is formulated with specific fibers to give higher resistance.
Surface Preparation
Avoid use if showers are foreseen. Surfaces must be structurally sound, free of frost, dust, rust, chipped paint, oil, grease and any loose or deteriorated materials. At first on a new foundation, seal the joint between footing and foundation wall with a bead of plastic cement CR-20 or CR-25 and fill holes, cracks and weak spots. You can also use the Fondafix to level imperfection on foundations wall. It will give a nice leveled finish.
Application
Stir well before use. Apply uniformly with a roller, paintbrush.
Cleanning
Clean tools and equipment with mineral spirits.
Norm
CAN/O.N.G.C. 37.16 M89
Package
This product is available in 18,9 L
Shelf Life
12 months after purchasing date when kept in its tightly closed original container.
Technical Data Table
  Specifications
Color Black
Solids by Volume 65 to 75 %
Weight 0,96 kg/L (8 pounds/gal)
Coverage 1 to 2 L/m² (2 to 4 gal/100 ft²)
Dry Time*

To 50 % R.H. 20°C (68°F)

To the Touch* 4 hours
Completely Dry* 48 hours
Service Temperature -30°C to 95°C (-22 to 203°F)
Application Temperature Can be applied at low temperature but preferably above 10°C (50°F). Thickens at low temperature.
Chemical Resistance

Resistant to water calcium chloride, salt and to lightly acid or alkaline solutions. Do not resist to oils, greases and solvents.

Permeance to Water Vapor (ASTM E96) 3 mm (1/8'') coat before drying 2.9 ng/Pa.m2.s (0.05 perms)
 

* Drying Time depend of surface porosity and temperature.

Restriction
Let dry completely before covering or back fill to avoid prematurely product detoriation and possibility of humidity infiltration. If product is applied near a ventillation unit or an air conditioner, take necessary precautions to avoid infiltration solvent odor inside. Protect freshly applied product and open container from open flame and adjacent welding activity. For EXTERIOR USE only.
Warranty
5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount in excess of the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer's control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).

Fibered Foundation Coating
Fibered Foundation Coating
Écoresponsable
Avertissement Simdut Simdut

MAY CAUSE IRRITATION.
CONTENT MAY CATCH FIRE. COMBUSTION DANGER
FIRST AID: Skin contact : Wash skin immediately with soap and water.
Eye contact : Flush immediately with plenty of water for at least 15 minutes, lifting upper and lower eyelids. Consult a physician.
Clothes contact : Remove contaminated clothes.


Inhalation : Move the victim to fresh air. Consult a physician if necessary.
Ingestion : DO NOT INDUCE VOMITING. Give milk if conscious. Keep victim warm and call immediately a physician.

KEEP OUT OF REACH OF CHILDREN.
READ SAFETY DATA SHEET BEFORE USING THIS PRODUCT

 
PDFdownload PDF version