Eagle Patch Supreme Rapid-set Polymer modified patching compound Français
Description
Eagle Patch Supreme is a universal polymer modified rapid-set patching compound, formulated to patch holes, cracks, voids, depressions and other irregularities. This smooth finish mortar is specially to prepare interior plywood or concrete floors before installation of floor coverings like carpet, vinyl, composite tile, ceramic and hardwood. Having superior performances, it can be used, without any additive addition, to patch more difficult substrates like smooth concrete, cut-back traces, old ceramic tiles. Even on old vinyl coverings to avoid pattern telegraphy in new floor covering. It is compatible with all types of floor covering adhesives. Eagle Patch Supreme is for residential, commercial and institutional uses. This material cannot be used as a wearing surface. Fill holes, voids and depressions of 1 mm (1/32”) to 12 mm (½”) deep or level floors or making small slopes.
Surface Preparation
All surfaces shall be structurally sound, clean and free from traces of dust, oil, grease, wax, paint, curing agent, coatings and loose particles, acids, alkalis or any other material that can reduce adhesion. The only recommended wood substrate for residential floors is exterior grade plywood installed in an interior dry area. All concrete substrates shall be completely cured and at least 28 days old. They must be roughened for a good adhesion. Ambient surface and product temperature must be superior than 10ºC (50ºF) and lower than 35ºC (95ºF) during the installation and for the first 24 hours.
Mixing
In a clean container, pour exactly 320 ml of fresh clean water per kilogram. Add gradually Eagle Patch Supreme powder while mixing with a low-speed drill equiped with a paint mixer. Blend for 1 to 2 minutes scraping recipient walls and paddle to obtain a homogeneous trowelable consistency. Spread immediately to the desired texture and finish. Mix portion of product that can be applied in less than 10 minutes.
Curing
Eagle Patch Supreme takes about 60 minutes to dry. Curing time may vary according to temperature and humidity level. Make sure application is dry prior to allow light traffic for floor covering installation.
Cleanning
Clean working tools and hands with water while product is still fresh.
Package
bags size 22.7kg
Storage
Store in a dry and fresh area. Protect from freezing. Shelf life is 6 months in its original non-opened container.
Technical Data Table
CARACTERISTICS EAGLE PATCH SUPREME (32% water)
Pot Life 10 minutes
Setting time initial / final ASTM C-191 11 minutes / 20 minutes
Services Time 60 minutes
Density ASTM C-185 1,75 kg/L
Coverage by kg of product 0.28 m² (3 ft²) at 3 mm (1/8'') thickness
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Eagle Patch Supreme
Eagle Patch Supreme
Ecologic
Avertissement Simdut Simdut

CORROSIVE: This product contains a cementitious blend and may cause eyes, skin and respiratory system irritation. When using this product: Wear safety glasses, gloves and a NIOSH approved anti-dust mask. Keep out of reach of children.


FIRST AID TREATEMENT: Skin contact: Wash with soap and water. Eye contact: Flush eyes immediately and abundantly with water for 15 minutes keeping eyelids opened. Consult a physician immediately. Ingestion: DO NOT INDUCE VOMITING. Give water if conscious. Keep victim warm and call immediately a physician.
 
PDFdownload PDF version