Eagle Tacky Prestige Concrete Flexible Coating Français
Description
EAGLE TACKY PRESTIGE is a polymer modified cementitious, with two composants, specifically formulated to improve life of different materials. This high performance finishing product is flexible, environmentally friendly and affordable. You will protect and beautify all steel, wood,concrete, sandstone, stone or brick surfaces. ADVISED ON PLYWOOD. With a unique quartz texture, it is available in several trendy colors. Easy to apply, in addition to being odorless and non-skid, it has a high resistance to cold, heat, UV rays, mildew,calcium, abrasive and acid rain. This is the perfect product to give a new life to your balcony, floor or foundation.
Surface Preparation
It is important to prepare properly the surface to cover. Clean the surface with a high water pressure and a universal degreaser or brush and rinse thoroughly with water. Surfaces must be cleaned, free from rust, peeled paint, dust, dirt, grease and mold. We recommend to scarify the surface to get more adhesion. Holes, cracks and imperfections must be repaired first with the appropriate product. See the full range of Condor repair products.
Application
Dilute the quantity that can be applied within 1 hour. After this time, the mixture should be changed because the setting reaction will be too late. For the application and maturation of EAGLE TACKY PRESTIGE, it is necessary to have an ambient temperature above 10 °C and below 30 °C. To avoid rapid drying during hot season, protect from sun and wind. Avoid applying on direct sunlight. Protect from frost and rain during the 48 hours of application. In case of rain, protect the surface until completely dry. Apply EAGLE TACKY Prestige with a trowel, a brush or a stucco gun. You can also easily apply it with a specific roller sold at Condor Chimiques Inc. You only have to order it in the same time as your Tacky Prestige. If you whish this is also possible to use a special roller expressively developed by Condor Beton to ease the application of Tacky Crete or Tacky Prestige. Spread the product at horizontal direction for asphalt shingles or vertical direction on metal. Two hours after applying the Tacky Crete, apply two coats of Eagle Concrete Sealer to get a nice glossy finish to waterproof and ease the maintenance.
Mixing
Dilute the quantity that can be applied within 1 hour. After this time, the mixture should be changed because the setting reaction will be too late. In a container, pour Part B (liquid). If you want to add color to the mix *, insert in Part B in order to get a nice even color. Then, gradually add Part A by mechanically mixing using a stirrer to obtain a homogeneous mixture. Let the mixture sit for 5 minutes then apply EAGLE TACKY Prestige. Never dilute the mixture with another liquid that is not sold with the product. In hot season it is recommended to mix only half a kit at a time to avoid the mixture to become too thick. *The color pigments are sold separately.
Yield

22.7 kg can cover up to 11,2 m2 (120 ft2) to a thickness of 3 mm (1/8’’). The coverage may vary depending on the application method, the skill of the applicator, porosity and surface condition.

Curing
Depending on the temperature and ambient humidity, let dry for at least 2 hours prior to the application of the sealant. The temperature and humidity are factors that influence drying time.
Package
Available in 11.34 kg and 22.7 kg
Storage
Keep this product from freezing. It can be kept in its original container, tightly closed, for 1 year from date of purchase.
Technical Data Table
CARACTERISTICS  
Density ASTM C 185 1,59 kg/1L
Dry Time* 8.5 to 9.5
Dry Time* 50% HR to 20°C
To the Touch*

About 1 hour

Completely Dry* 2 hours
Pull-out strength on concrete 7 days 1.80 MPA 261 PSI
CSA A23.2-6B 28 days 3.49 MPA 505 PSI
Service Temperature - 40°C to 90°C (- 104° F to 194° F)
Application Temperature minimum 10°C (50° F)
Chemical Resistance Resistant acid or alkaline solutions, greases and solvents.
Permeability to water vapor (ASTME96) impermeable
 

* Drying Time depend of surface porosity and temperature.

Restriction
Do not apply on a roof recovered with tar or gravel or needing major repairs. Do not do outside work if the weather is uncertain for the next 48 hours. Keep from freezing. Maintain and use at temperatures between 10 °C and 30 °C. Make sure the job is done safely. Dilute the quantity that can be applied within 1 hour. After this time, the mixture should be changed because the setting reaction will be too late.
Warranty
The customer shall verify of the suitability of this product for the intended purpose. Applicator's skill, weather and surface conditions being beyond manufacturer's control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. FOB plant.

Eagle Tacky Prestige
Eagle Tacky Prestige
Ecologic

Click here to view your colours

Click here to view your colours

New! Easy to install with a roller
New! Easy to install with a roller
Avertissement Simdut Simdut

CORROSIVE: This product contains a cementitious blend and may cause eyes, skin and respiratory system irritation. When using this product: Wear safety glasses, gloves and a NIOSH approved anti-dust mask. Keep out of reach of children.


FIRST AID TREATEMENT: Skin contact: Wash with soap and water. Eye contact: Flush eyes immediately and abundantly with water for 15 minutes keeping eyelids opened. Consult a physician immediately. Ingestion: DO NOT INDUCE VOMITING. Give water if conscious. Keep victim warm and call immediately a physician.
 
PDFdownload PDF version