Thiroco Sealer Aqua 100 Sealer Formulated For: Thiroclair, Thirotane & Aquavernis Français
Scelleur Aqua 100 is a rapid setting vinyl primer coat for interior wood floors. Formulated to be used with Thiroclair, Thirothane and AquaVernis varnishes.
Surface Preparation
Sand completely along the wood grain with a coarse sandpaper (80) then sand the surface with a finer sandpaper (120) until a smooth and uniform surface is obtained. Any dust or deleterious substances and debris must be removed completely with a vacuum cleaner and followed by a final cleaning with a solvant humid pad to eliminate any trace of dust.
The use of this primer will prevent the varnish to penetrate in the wood. Temperature and relative humidity are critical factors for an appropriate drying. For the application and the cure of SCELLEUR Aqua 100, temperature should be more than 10ºC. However best conditions are 25°C and 50% of relative humidity. During application, allow air circulation without draught. Scelleur Aqua 100 as a first coating will reduce to approximately 30 minutes waiting time before application of finishes THIROCLAIR, THIROTHANE or AQUAVERNIS. Pour a small quantity directly on the floor or in a paint pan. Spread the finish evenly and uniformly using a pure silk bristle brush or a pad applicator. Allow approximately 20 to 30 minutes of drying prior to sand lightly the surface with a sandpaper of 180 to 220 along the wood grain. Taking care of removing any dust coming from sanding before application of the finish coating.
Clean tools with water.
Avalable in 3.78 L.
Keep from freezing
Shelf Life
Protect from freezing. This product can be preserved in its original container, sealed for 1 year from date of purchase.
Technical Data Table
Color Clear
Gloss Gloss
Compatible Finish formulated for : Aquavernis, Thiroclair & Thirothane,
Resine Type Vinyl
Solvant Aromatic Hydrocarbon
Coverage / 3,78L up to 28,3 m² (305 ft²)
Viscosity (25°C) 15 - 30 secs. (Coupe Ford #4)
Solides (%) 9 - 11%

at toutch 5 minutes, sanding 20 minutes,
recover 20 to 30 minutes
All sanding residue must be removed with a solvant damp cloth

Storage Temperature 15 to 25°C keep from freezing

* Drying Time depend of surface porosity and temperature.

It is not necessary to remove food from application site. Allow approximately 20 minutes of drying before stepping on the wood floor. After date of purchase, this product can be stored 1 year when kept in its tightly closed original container. Store at temperatures between 15°C and 30°C. Do not alternate with another product.
The customer shall verify of the suitability of this product for the intended purpose. Applicator’s skill, weather and surface conditions being beyond manufacturer’s control, we limit our liability to replacement of defective material only in sealed container, within 1 year of proof of purchase. Free on board (FOB plant).

Thiroco Sealer Aqua 100
Thiroco Sealer Aqua 100
Warning Simdut

MAY IRRITATE EYES AND SKIN. Do not get in eyes, on skin or on clothing. Keep out of reach of children.

FIRST AID TREATMENT: Contains Stoddard solvent. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for 15 minutes. If on skin, clean with mineral oil followed by soapy water then rinse well.
PDFdownload PDF version