Nos produits

Plastic cement – Wet and dry surfaces CR-25

The CR25 is a multipurpose plastic cement specially designed to provide a very high adhesion capacity on wet surfaces. This product is used to stick asphalt shingles, to seal cracks and holes on foundations and on asphalt roofs. It also seals chimney, vent and shingle flashings. For an underwater application, use the CR225.

Would you buy this product?

FIND A RETAILER

Advantages

  • Multipurpose
  • Excellent value
  • Application verticale et horizontale
  • Resists perfectly to temperature variations

Documentation

Product sheet

Download
Categories: , , , Tag:

Use

Functions

Stick / Repair / Seal

Building components

Roofing / Foundation

Surfaces

Asphalt shingle/ Concrete / Metal / Wood

Covering rate

0,32 m2/kg applied 3 mm thick (1,56 ft2/lbs applied 1/8'' thick)

Colors

Black

Preparation / Application

Application temperature

10°C and more

Service temperature

-40°C to 85°C

Application tools

Putty knife / Trowel / Glove / Caulking gun

Surface preparation

Surfaces must be clean and free of dust, dirt or other contaminants.

Drying

Allow about 4h for surface drying and about 48h for complete drying. The drying time depends on the application method, the ambient temperature, the surface and the thickness applied.

Caution / Cleaning / Storage

Restriction / Caution

Keep out of the reach of children. If the product is applied near a ventilation or air conditioning unit, take the necessary precautions to prevent infiltration of solvent odours toward the inside. Keep open container or freshly applied product away from open flames, sparks or other sources of heat. For outdoor use only.

Cleaning

Mineral spirits

Storage

The product may be kept in its original sealed container up to 12 months after the date of purchase by the user.

Available format

310ml / 800ml / 1kg / 4kg / 1 kg / 20kg

Warranty

5 years limited warranty when installed and / or applied as recommended by the manufacturer. We will replace the product with a manufacturing defect. Under no circumstances will the manufacturer be liable for any amount exceeding the purchase price of the product used. The consumer must ensure that this product is suitable for the intended use. Because of atmospheric conditions, applicator competence and surface conditions being independent of the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid factory (FAB factory).