Function

Repair

Building components

Asphalt Driveway / Foundation

Surfaces

Concrete / Wood / Masonry / Metal / Fiber cement / Asphalt pavement

Covering rate

0,5 m²/kg

Color

Black

Application temperature

10°C and more preferably. The product will be thicker when the temperature decreases.

Service temperature

-40°C to 85°C

Application tools

Trowel / Caulking gun

Surface preparation

Surfaces must be clean and free of dust, dirt or other contaminants. The temperature of the metal substrates must be below 37°C during application. Porous or dusty surfaces must be primed.

Application

During colder periods, keep the product in a temperate place to facilitate its application. Do not apply if rain is expected. To repair joints and cracks, firmly apply enough product in depth to fill all the cavities and close the gaps. Avoid air pockets or blisters and well done finishing joints provide better adhesion to overlapping surfaces. Close the container after each use. For the caulking tube, cut the nozzle tip at 90° to obtain a bead between 6 to 12 mm (1/4 to 1/2 inch). Perforate the seal inside the nozzle.

Drying

Allow about 6h for surface drying and about 48h for complete drying. The drying time depends on the application method, the ambient temperature, the surface and the thickness applied.

Restriction / Caution

Do not apply on wet or frosted surfaces. If the product is applied on vertical surfaces, do not apply in cracks larger than 25mm of width. Keep out of the reach of children. If the product is applied near a ventilation or air conditioning unit, take the necessary precautions to prevent infiltration of solvent odours toward the inside. Keep open container or freshly applied product away from open flames, sparks or other sources of heat. For outdoor use only. Do not use on a new asphalt shingle roofing.

Cleaning

Mineral spirits

Storage

The product may be kept in its original sealed container up to 12 months after the date of purchase by the user.