Nos produits

Permanent amber rustproofing Techno Force 1

The rustproofing Techno Force 1 is an amber product composed of corrosion inhibitors, wax, polymer and virgin oil. The coating formed protects new or used metal surfaces against rust formation. The addition of polymer provides exceptional adhesion properties to surfaces and considerably increases its protection against corrosion. Being amber, it becomes the ideal product for visible surfaces of the vehicle where aesthetics becomes an issue. This product has a gelatinous consistency which allows the product to be easily dispersed in areas where water may collect. It forms a barrier that remains flexible at any temperature. Its high adhesion increases its durability so the product will not wash out. Its fruity odor makes it pleasant to use for applicators and the customers. Used indoor and outdoor surfaces, it provides effective protection up to 10 years.

Would you buy this product?

FIND A RETAILER

Advantages

  • Very high adhesion
  • Translucent finish
  • Doesn’t leak
  • Does not wash out, very durable
  • Made of virgin raw materials, without any contaminant
  • Fruity odor
  • Doesn’t damage paint or rubber trimmings
  • Won’t crack and stay flexible
  • Protection up to 10 years

Documentation

Product sheet

Download
Categories: , Tag:

Use

Function

Protection against rust formation

Application fields

Automobile / Industrial Application / Agricultural Application

Surfaces

New or used metal / Parts more aesthetic: Doors, Hood, Trunk lid, Recesses.

Covering rate

2 m2/L layer of 1/32 in

Color

Amber gel

Preparation / Application

Application temperature

10°C and more

Service temperature

Max 85°C

Application tools

Spray gun / Paint brush

Surface preparation

Degrease and remove all dirt by alkaline or high pressure cleaning with a suitable detergent. Eliminate any moisture, rust, or other materials that could prevent the product's effectiveness.

Application

Ideally, keep the product in a temperate place. Shake well by tumbling or rolling on the ground before application. Following cleaning and thorough drying of the vehicle, apply the product in a thin layer at least 5 mils thick using a spray or brush. Use the necessary safety precautions for personal protection and cleanliness of the place of application.

Drying

Allow about 5 hours for surface drying. The drying time depends on the application method, the ambient temperature and the surface.

Caution / Cleaning / Storage

Restriction / Caution

Avoid using this product where the smell of solvents may affect food or other products that may be affected. Never apply tothe inside of polymer panel, ou electrical components or on fiberglass that has not been pre-coated with a factory primer.

Cleaning

Mineral spirits

Storage

The product should be stored away from the sun to prevent premature oxidation of the product. It can be kept in its original sealed container until 12 months after the date of purchase by the user.

Available format

4L / 18,9L / 58L / 205L

Warranty

The customer must ensure that this product is suitable for the intended purpose. Atmospheric conditions, applicator’s skills and surface conditions being beyond the manufacturer’s control, we limit our liability for one year following the date of purchase, with proof of purchase, to replacement of defective material only in its original hermetic container. Port paid plant (FOB plant).